I'll try to remember to take pictures after work. Here's what I did:
bottom insert, horizontal thin troughs lined in a column on the left:
Insert the building wall pieces here. Sort by length, they will all fit.
Bottom tray, vertical wide trough on right:
Place built doors here, standing, to form a single long column. When doing this, make sure the vertical supports for the doors are offset in an alternating zig-zag pattern. You will end up with 1 door that doesn't fit.
Bottom tray, short wide vertical trough 2nd from right:
Place built windows here, use same zig-zag offset technique in a vertical column. All windows will fight.
Bottom tray, short wide vertical tray 2nd from left:
Place the 4-way split barrels/water towers(?) here, unassembled.
Bottom Tray, wide horizontal trough top-middle:
Place the assembled long bush cardboard wall here.
Bottom tray, small wide horizontal tray 2nd from top:
Place the short cardboard bush walls here, assembled. Vertically. Alternate 1 standing normally/next stored upside down to maximize usage of the space. Will have 1 wall that doesn't fit.
Place plastic cover for bottom tray on top. In the recess on the left that holds the building wall pieces, place the extra door, the extra short bush wall, and a baggie containing the building vertical supports used for contstruction.
Top tray, bottom left:
Place medium length bushes here, assembled lying flat. Alternate the orientation to maximize space. All bushes should fit.
Top tray, bottom middle:
Place all tree pieces here unassembled, laid flat. Make sure to keep the 2 odd shaped tree pieces together (i like to put them on the very bottom).
Top tray, bottom right:
Place the 2 large doors here, laid flat & fully assembled. They will fit.
Hope that all helps until they finish the official packing guide.
bottom insert, horizontal thin troughs lined in a column on the left:
Insert the building wall pieces here. Sort by length, they will all fit.
Bottom tray, vertical wide trough on right:
Place built doors here, standing, to form a single long column. When doing this, make sure the vertical supports for the doors are offset in an alternating zig-zag pattern. You will end up with 1 door that doesn't fit.
Bottom tray, short wide vertical trough 2nd from right:
Place built windows here, use same zig-zag offset technique in a vertical column. All windows will fight.
Bottom tray, short wide vertical tray 2nd from left:
Place the 4-way split barrels/water towers(?) here, unassembled.
Bottom Tray, wide horizontal trough top-middle:
Place the assembled long bush cardboard wall here.
Bottom tray, small wide horizontal tray 2nd from top:
Place the short cardboard bush walls here, assembled. Vertically. Alternate 1 standing normally/next stored upside down to maximize usage of the space. Will have 1 wall that doesn't fit.
Place plastic cover for bottom tray on top. In the recess on the left that holds the building wall pieces, place the extra door, the extra short bush wall, and a baggie containing the building vertical supports used for contstruction.
Top tray, bottom left:
Place medium length bushes here, assembled lying flat. Alternate the orientation to maximize space. All bushes should fit.
Top tray, bottom middle:
Place all tree pieces here unassembled, laid flat. Make sure to keep the 2 odd shaped tree pieces together (i like to put them on the very bottom).
Top tray, bottom right:
Place the 2 large doors here, laid flat & fully assembled. They will fit.
Hope that all helps until they finish the official packing guide.